欢迎来到天津斯巴克斯机电有限公司

返回首页 | 收藏 | 网站地图

行业动态
如何延长您的汽车冲压机皮带的使用寿命
日期:【2017-05-08 11:13】 共阅:【】次

  

标题:如何延长您的汽车冲压机皮带的使用寿命

 

Auto stamping conveyors can be an extremely challenging environment for conveyor belts, making it difficult to keep belts functioning properly and productively.

对于输送皮带来说,汽车冲压输送机可谓是极具挑战性的一种应用环境了,这种环境不利于保持皮带正常有效地运转,为之加大了难度。

 

These belts must work against slicing, oils, sharp edges, and powerful cutting. It is not uncommon for some parts to get stuck in between stacking tables or pulleys resulting in major accidents and unnecessary repair time. Ergonomic conditions and safety are also major factors that come into play when creating more efficient transfer points with absolute minimum spacing.

这种应用环境下的皮带必须能够抗滑、耐油、耐利器,也要能抵抗住强力的切削。一些零件非常容易卡在堆垛台和托辊之间,从而导致大批事故的发生,也增加了很多不必要的维修时间。符合人体工程学的作业环境及安全性是最主要的因素,当创作出更有效的且间距最小的传输点时,这些因素便能发挥积极作用。

 

Two common industry accepted solutions will maximize your belt life, provide substantial cost savings, improve up-time, and demand less from your maintenance teams. 

两套业界公认的解决方案将大大地提升您皮带的使用寿命,它们将有助于节省大量成本,提高正常运行时间,减少维修次数。

 

Sokitooit Strip   Sokitooit

Sokitooit Strip    Sokitooit皮条

Standard Belt   标准皮带

 

Segmented Urethane V-Guide  分段聚氨酯V型导轨

Segmented Urethane V-Guide 分段聚氨酯V型导轨

Thermoweld V-Guide  熔接V型导轨

 

An exceptional bond is created as a segmented urethane guide is cast onto the back of a belt as a liquid and provides superior support compared to a thermoweld v-guide, a universal application on many conveyor belts. The unique lug construction will not peel off in a continuous piece like the thermoweld offering might.

分段聚氨酯导轨这种独特的连接件安装在皮带的背面,与熔接V型导轨相比,它能提供更优质的支撑,在输送机皮带上普遍应用。独特的凸耳结构将不会从一个连续运动件上脱离,而熔接型则可能会产生这个问题。

 

We can remove the cover of most belts, and position a Sokitooit Strip in any width and location on a belt.  Multiple strips are ideal for parts with sharp points that cut into the belt. We also have documented case studies that show Sokitooit Strips providing cost savings as much as 12 times the belt life of the original specification.

我们可以将大多数皮带的覆盖物移除,并将Sokitooit皮条放置在皮带的任何宽度及位置上。多个皮条对于会易戳进皮带中的尖端零件来说是最理想的。我们也有案例记录显示Sokitooit皮条能够节约成本,使原始规格下的皮带寿命增加12

上一篇:
下一篇: